ALKA product reference
ALKA 414
Glass Flake Epoxy Coating System
Alka-414 or Glass Flake Epoxy is a high-performance protective coating formulated with epoxy resin and microscopic glass flakes to provide exceptional corrosion and chemical resistance. It is widely used in heavy industrial, marine, offshore, and chemical processing environments where steel and concrete structures are exposed to aggressive conditions such as seawater, chemicals, moisture, and abrasion.
Pack size: 10L Kit
Overview
This coating system may be applied over Alka 404 (Zinc-Rich Epoxy Primers).
A common coating system is:
- Primer Coat – Zinc Rich Epoxy Primer
- Provides cathodic (sacrificial) corrosion protection
- Excellent adhesion to blast-cleaned steel
- Intermediate / Build Coat – MIO Epoxy or High-Build Epoxy
- Adds barrier protection and coating thickness
- Top / Protective Coat – Glass Flake Epoxy
- Provides superior chemical and moisture resistance
- Creates an impermeable barrier against corrosion
In some systems, Glass Flake Epoxy itself may serve as an intermediate or lining coat rather than the final topcoat.
Usage
Glass Flake Epoxy is mainly selected for environments involving:
- Severe corrosion
- Chemical exposure
- Saltwater immersion
- High humidity
- Abrasion and erosion
- Long-term industrial service conditions
Its excellent barrier protection and durability make it ideal for critical assets requiring extended maintenance intervals and long coating life.
Packaging
4 Litre, 20 Litre.
Colour
Custom Industrial Shades
Product Details
Shelf life: 12 months
Storage conditions
Store away from direct sunlight and away from naked flames, sparks, and heating.
Flash point >25 C
Density: 1.2 – 1.4 Kg/L
Application
Coverage
Approximately 3–6 m²/L at recommended DFT
Approximately 3–6 m²/L at recommended DFT
Dry Time
Touch dry in 2-4 hours
Touch dry in 2-4 hours
Recoat time (at 25 C)
Re-coatable: 6-12 hours – maximum depends on temperature and product specification
Re-coatable: 6-12 hours – maximum depends on temperature and product specification
APPLICATION INSTRUCTIONS
- Conventional spray
- Airless spray
- Brush or roller for small areas and touch-up work
- Temperature: 10°C – 40°C
- Relative Humidity: Below 85%
- Thinner: Toluene / Xylene blend
- Equipment cleaning: Same as thinner
CLEANING OF EQUIPMENT
Xylene can be used for cleaning tools and equipment before the mixed compound begins to harden. Once cured, it can only be removed mechanically.
Xylene can be used for cleaning tools and equipment before the mixed compound begins to harden. Once cured, it can only be removed mechanically.