ALKA 1122-Component, 100% Solid , Good chemical resistance, Low cure and Food grade
Food Grade Epoxy Coating
Alka 112 is a two component ,100% Solid , Low cure , Food grade , good chemical resistance and cost effective. It is used in a range of Roller Applied and Self Levelling flooring systems and applications.
Alka 112 Food-grade epoxy flooring meets these requirements and works well in the following:
- Food and beverage centers,
- Meat processing plants ,
- Cheese and dairy facilities,
- Food packaging plants
- Any Commercial application where hygine standards such as FDA must be followed.
- Good workable time
- Excellent bond strength even to the damp and concrete,
- Easy application/Can be applied by brush or roller,
- Low VOC
- Low permeability
- Excellent adhesion
- Good mechanical resistance.
- very good chemical resistance
24 Kg, 18 Kg Resin & 4 Kg hardener & 2 Kg Pigment
Shelf life: 12 months
Store away from direct sunlight and away from naked flames, sparks and heating.
Flash point >25 C
Density: 1.4 Kg/L
Recommended coating thickness is approximately 160-200 microns per coat
Pot Life (at 25 C)
approximately 40-45 minutes
Curing time (at 25 C)
Tack free time: 12 hours
Re-coat able: 12-24 hours
Light traffic: 3 days
Full cure: 7 days.
Approximately 0,25–0,3 kg/m² applied as a roller coating.
Approximately 0,9–1,2 kg/m² applied as a self-smoothing wearing course or as finish locking coats on textured finishes.
Alka primer: 5–6 sqm/litre
First coat: 5–6 sqm/litre over unprimed
6–8 sqm/litre over primed or coated
Second coat: 6–8 sqm/litre Over trowelled on toppings 2–4 sqm/litre
Alka 112 can be applied by brush or roller, selection of roller is dependent on the type of finish required.
CLEANING OF EQUIPMENT
Xylene can be used for cleaning tools and equipment before the mixed compound begins to harden. Once cured, It can only be removed mechanically.