ALKA product reference
ALKA 118
2-Component, High Performance, Anti-Static Epoxy Flooring
Alka-118 is a specialized two-component epoxy coating system designed for use in environments where electrostatic discharge (ESD) must be controlled. Alka-118 Anti-static epoxy coating is formulated with conductive materials that allow for the dissipation of static charges safely into the ground, preventing the accumulation of electrostatic discharge (ESD).
Pack size: 24Kg Kit
Overview
Anti-static epoxy floor coatings are specialized flooring solutions designed to prevent the build-up of static electricity. These coatings are commonly used in environments where static discharge can pose a hazard, such as electronics manufacturing facilities, data centres, pharmaceutical plants, hospitals, and areas handling flammable materials.
Where it could be used.
:
Where it could be used.
:
- Electronics Manufacturing: Sensitive electronic components can be damaged by even minor static discharges. Anti-static coatings protect both workers and products.
- Data Centres: Prevents static buildup, protecting sensitive computer and networking equipment.
- Healthcare Facilities: In environments with sensitive medical equipment, anti-static floors help reduce the risk of static discharge.
- Pharmaceuticals: Cleanrooms and production areas benefit from the seamless, sterile surface these coatings provide.
- Aerospace and Defence: Where flammable or explosive materials are handled, static discharge can be dangerous.
- Laboratories.
Advantages
- Durable – 100% solids.
- Electrostatic discharge (ESD) protection,
- Slip-resistant surface possible,
- Impact-resistant, hard-wearing, and abrasion-resistant,
- Designed to take heavy loads,
- Low maintenance,
- Good mechanical resistance,
- Low Maintenance.
- Durable finish, high gloss, and high color stability.
- Easy application.
Packaging
24 Kg, 20 Kg Resin & 4 Kg hardener.
Colour
– Neutral.
Product Details
Shelf life: 12 months
Storage conditions
Store away from direct sunlight and away from naked flames, sparks and heating.
Flash point >25 C
Density: 1.6 Kg/L
Application
Layer thickness
Recommended coating thickness is approximately 160-200 microns per coat
Recommended coating thickness is approximately 160-200 microns per coat
Pot Life (at 25 C)
approximately 25 minutes
approximately 25 minutes
Curing time (at 25 C)
Tack free time: 8 hours
Re-coatable: 12-24 hours
Light traffic: 3 days
Full cure: 7 days.
Tack free time: 8 hours
Re-coatable: 12-24 hours
Light traffic: 3 days
Full cure: 7 days.
Consumption
Approximately 1.6–3.2 kg/m² applied as a self-smoothing wearing course or as finish locking coats on textured finishes.
Approximately 1.6–3.2 kg/m² applied as a self-smoothing wearing course or as finish locking coats on textured finishes.
APPLICATION INSTRUCTIONS
The floor needs Alka 104 as the epoxy primer. Then, Alka 118 will be trowelled to a thickness of 1-2mm. The next step would be to install a copper tape net. Thereafter, Alka 118 must be trowelled again to a thickness of 1-2 mm.
CLEANING OF EQUIPMENT
Xylene can be used for cleaning tools and equipment before the mixed compound begins to harden. Once cured, it can only be removed mechanically.
Xylene can be used for cleaning tools and equipment before the mixed compound begins to harden. Once cured, it can only be removed mechanically.