ALKA 112 F

2-Component, 100% Solid , Good chemical resistance, Flexible and Food grade

Flexible Food Grade Epoxy Coating

Alka 112F is a two component ,100% solid , low cure , flexible, food grade , good chemical resistance and cost effective epoxy coating system. It is used in a range of roller applied and self-levelling flooring systems and applications.


Alka 112F flexible food-grade epoxy flooring meets these requirements and works well in the following:

  • Food and beverage centers,
  • Meat processing plants ,
  • Cheese and dairy facilities,
  • Breweries,
  • distilleries,
  • Wineries
  • Food packaging plants
  • Kitchens
  • Bakeries,
  • Any Commercial application where hygine standards such as FDA must be followed.


  • Good workable time
  • Excellent bond strength even to the damp and concrete,
  • Easy application/Can be applied by brush or roller,
  • Low VOC
  • Low permeability
  • Excellent adhesion
  • Good mechanical resistance.
  • very good chemical resistance


24 Kg, 18 Kg Resin & 4 Kg hardener & 2 Kg Pigment


– Neutral.

Alka Colour Solutions Colour Card [Click here]

Shelf life: 12 months

Storage conditions

Store away from direct sunlight and away from naked flames, sparks and heating.

Flash point >25 C

Density: 1.4 Kg/L

Layer thickness
Recommended coating thickness is approximately 160-200 microns per coat

Pot Life (at 25 C)
approximately 40-45 minutes

Curing time (at 25 C)
Tack free time: 12 hours
Re-coat able: 12-24 hours
Light traffic: 3 days
Full cure: 7 days.

Approximately 0,25–0,3 kg/m² applied as a roller coating.
Approximately 0,9–1,2 kg/m² applied as a self-smoothing wearing course or as finish locking coats on textured finishes.

Alka primer: 5–6 sqm/litre
First coat: 5–6 sqm/litre over unprimed
6–8 sqm/litre over primed or coated

Second coat: 6–8 sqm/litre Over trowelled on toppings 2–4 sqm/litre


Alka 112F can be applied by brush or roller, selection of roller is dependent on the type of finish required.

Xylene can be used for cleaning tools and equipment before the mixed compound begins to harden. Once cured, It can only be removed mechanically.

Find the right product

Find the right Colour

Contact Us

Do you want to know more about our products and how we can help you? Leave your contact details here and we’ll get in touch.

Alternatively, you can call us anytime on

Tel: 1300 51 51 50